User Tools

Site Tools


shift_knob

SHIFT KNOB INSTALLATION

Go to Home Depot and get either the 1 or 5 minute epoxy. De-grease the surfaces with alcohol and put a drop it two on the crush ring (inside ) and inside the knob. It will not take much. Install the knob. It will give it more grip. Yes you can break free, but this will give it more grip and will hopefully solve your problem. I have used this technique to reuse these gaskets in a pinch. They are typically one use only.

Update: 914Rubber.com now has Shift Knobs with set screws that are reusable.

Buy a 5-Speed Shift Knob at 914Rubber.com

shift_knob.txt · Last modified: 2021/04/04 20:46 by 914rtkadmin

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki