User Tools

Site Tools


vertical_targa_seals

VERTICAL TARGA SEALS

We make them longer to you can cut for a perfect fit. Once you have the top situated so the height make a perfect seal, you can close the door onto the seal and mark with a pen. Cut below the line. Then try to shut again. You may need to trim a little more off, but you can make the seal sit snugly right on top of the door end cap.

TIP- Use soapy water and a break knife (so you have a long blade) to cut the rubber. The soap lubricates the rubber as it cuts. It will cut like butter. Be careful! It will do this to skin also!

vertical_targa_seals.txt · Last modified: 2021/04/04 20:29 by 914rtkadmin

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki